1. Lift up the vehicle, and then remove the rear wheels.
2. Release the parking brake.
3. Remove the brake hose bracket.
4. Remove the two mounting bolts, and remove the disc brake assembly.
5. Suspend the disc brake assembly so that the hose is not stretched.
6. Remove the disc rotor.
NOTE:
If it is difficult to remove the disc rotor, perform the following two methods in order.
(1) Turn the adjuster using a flat tip screwdriver until the brake shoe is far enough away to allow removal of the disc rotor.
|
(1) |
Adjuster |
|
(2) |
Flat tip screwdriver |
|
(3) |
Disc rotor |
(2) If it is difficult to remove the disc rotor from the hub, drive an 8 mm bolt into the threads B of the rotor, then remove the rotor.
