1. Disconnect the ground cable from battery.
2. Lift up the vehicle, and then remove the rear wheels.
3. Lift the crimped section of axle nut.
4. Remove the axle nut using a socket wrench while depressing the brake pedal.
CAUTION:
Remove the wheel before loosening the axle nut. Failure to follow this rule may damage the wheel bearings.
5. Remove the brake hose bracket and the rear ABS wheel speed sensor.
6. Remove the disc brake caliper from the rear housing, and suspend it from the vehicle using a string.
7. Remove the rear disc rotor.
8. Remove the four bolts from the rear housing.
9. Remove the rear hub unit bearing.
CAUTION:
• Be careful not to damage the magnetic encoder.
• Do not get closer the tool which charged magnetism to magnetic encoder.
|
(1) |
Magnetic encoder |
|
(2) |
Rear hub unit bearing |
NOTE:
If it is hard to remove, use the ST.
| ST1 926470000 | AXLE SHAFT PULLER |
| ST2 28099PA110 | AXLE SHAFT PULLER PLATE |
