1. Disconnect the ground cable from battery.
2. Lift up the vehicle, and then remove the front wheels.
3. Disconnect the front vehicle height sensor connector. (model with auto headlight beam leveler, left side only)
4. Remove the front vehicle height sensor. (model with auto headlight beam leveler, left side only)
5. Remove the front crossmember support plate. 
6. Remove the front stabilizer.
7. Remove the ball joint of front arm.
8. Remove the nut securing the front arm to crossmember. (Do not remove the bolt.)
9. Remove the front arm support plate.
10. Remove the bolt securing front arm to crossmember and pull the front arm out of the crossmember.
11. To remove the stud bolt, use the ST.
| ST 20299AG020 | STUD BOLT SOCKET |
CAUTION:
Do not remove the stud bolt without necessity. Always replace the parts with new parts when removed.
|
(1) |
Vehicle body |
|
(2) |
Stud bolt |