CAUTION:
• Be sure to use a new self-locking nut.
• Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
1. Install in the reverse order of removal.
Tightening torque:
Rear lateral link
120 N·m (12.2 kgf-m, 88.5 ft-lb)
Shock absorber
120 N·m (12.2 kgf-m, 88.5 ft-lb)
Stabilizer link
45 N·m (4.6 kgf-m, 33.2 ft-lb)
2. Inspect the wheel alignment and adjust if necessary.
3. Perform reinitialization of the auto headlight beam leveler system. (model with auto headlight beam leveler) 