1. Install the bolt (A) and nut (B) which secure the air cleaner case (front) to the body.
Tightening torque:
Bolt (A)
6 N·m (0.6 kgf-m, 4.4 ft-lb)
Nut (B)
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
2. Install the air cleaner element and air cleaner case (rear).
NOTE:
When installing the air cleaner case (rear), align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.
3. Connect the connector (A) to the mass air flow and intake air temperature sensor.
4. Connect the clamp (B) connecting the air intake boot and air cleaner case (rear).
Tightening torque:
2.5 N·m (0.3 kgf-m, 1.8 ft-lb)
5. Install the clip (C) to the air cleaner case (front).
