1. Install the catalytic converter and DPF cover upper and lower.
Tightening torque:
9.3 N·m (0.9 kgf-m, 6.9 ft-lb)
2. Install the exhaust temperature sensor 2.
NOTE:
Exhaust temperature sensor 2 has yellow marking on the harness.
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
|
(A) |
Yellow marking |
3. Temporarily attach the DPF pressure difference sensor pipe B by hand.
4. Set the gasket.
NOTE:
Install with the gasket tab facing the front of the vehicle.
|
(A) |
Tab |
5. Install the DPF pressure difference sensor pipe A.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
6. Tighten the DPF pressure difference sensor pipe B.
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
7. Install the exhaust cover.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
