Install in the reverse order of removal.
NOTE:
• Insert hoses as far as possible.
• Install clips 2.5 — 5 mm (0.0984 — 0.1969 in) from the hose end, and install with the tabs in the direction shown in the below figure.
|
(A) |
Towards vehicle right (Exterior) |
(C) |
Towards vehicle top |
(D) |
45° angle towards vehicle rear |
|
(B) |
Towards vehicle front |
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)