Install in the reverse order of removal while being careful of the following.
• Connect the quick connector as shown in the figure.
CAUTION:
• Check that there is no damage or dust on the quick connector. If necessary, clean seal surface of pipe.
• When connecting the quick connector, insert the pipe all the way in securely, then operate the push lock.
• If it is not possible to perform the push lock operation of the retainer, recheck whether the pipe is securely inserted.
• Confirm that the quick connector is securely connected.
|
(a) |
Retainer |
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
