1. Install the water pump onto cylinder block LH.
NOTE:
• Use a new gasket.
• When installing the water pump, tighten the bolts in two stages in alphabetical sequence as shown in figure.
Tightening torque:
First:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
Second:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
2. Install the hose to water pump.
3. Install the tensioner bracket.
Tightening torque:
24.5 N·m (2.5 kgf-m, 18.1 ft-lb)
4. Install the belt cover No. 2 LH.
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
5. Install the cam sprocket LH. 
6. Install the belt idler No. 2 (C).
Tightening torque:
39 N·m (4.0 kgf-m, 28.8 ft-lb)
7. Install the belt idler (B).
Tightening torque:
25 N·m (2.5 kgf-m, 18.4 ft-lb)
8. Install the automatic belt tension adjuster (A) with the tension rod held by a pin.
9. Install the timing belt.
10. Install the timing belt cover.
11. Install the crank pulley.
12. Install the V-belts.
13. Install the radiator.
14. Install the collector cover.