1. Attach the radiator lower cushion to the hole on the radiator lower bracket.
2. Install the radiator to vehicle.
NOTE:
Make pins on the lower side of radiator be fitted into the radiator lower cushions on body side.
3. Install the radiator upper brackets and tighten the bolts.
Tightening torque:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
4. Connect the two coolant filler tank hoses to the radiator.
5. Connect the radiator inlet hose.
6. Install the reservoir tank. 
7. Install the air intake duct.
8. Lift up the vehicle.
9. Connect the ATF cooler hoses. (AT model)
10. Connect the radiator outlet hose.
11. Connect the connectors to the main fan motor (A) and sub fan motor (B).
12. Install the heat shield cover to the radiator. (AT model)
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
13. Install the under cover.
14. Lower the vehicle.
15. Connect the ground cable to the battery.
16. Fill engine coolant.
17. Check the ATF level. (AT model)
18. Install the collector cover.