1. Disconnect the ground cable from battery.
2. Open the rear gate, and remove the luggage floor mat.
3. Remove the center sub trunk (A) (model with center sub trunk), and remove the sub trunk RH (B) and sub trunk LH (C) fixed by clips.
4. Tilt the rear seat backrest forward.
5. Remove the clips that is holding the rear seat backrest cover on the canister cover, and turn over the rear seat backrest cover toward the front side of the vehicle.
6. Disconnect connector (A) from the rear room antenna (models with keyless access), and remove the center canister cover.
7. Remove the canister cover RH.
8. Disconnect the quick connectors of purge tube (A), two-way valve tube (B), and drain tube (C), and remove the canister.
NOTE:
Disconnect the quick connector as shown in the figure.
|
(a) |
Retainer |
9. Remove clip (A) holding the rear room antenna harness to the canister cover (models with keyless access), and remove canister cover LH.
10. Disconnect the quick connectors of purge tube (A), two-way valve tube (B), and drain tube (C), and remove the tubes.
NOTE:
Disconnect the quick connector as shown in the figure.
|
(a) |
Retainer |
