1. Attach the radiator lower cushion to the hole on the radiator lower bracket.
2. Install the radiator to vehicle.
NOTE:
Make pins on the lower side of radiator be fitted into the radiator lower cushions on body side.
3. Install the radiator upper brackets and tighten the bolts.
Tightening torque:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
4. Connect the radiator inlet hose.
5. Install the air intake duct. 
6. Install the reservoir tank.
7. Connect the over flow hose.
8. Lift up the vehicle.
9. Connect the ATF cooler hoses. (Models without ATF warmer)
10. Connect the radiator outlet hose.
11. Connect the connectors of radiator main fan motor connector (A) and sub fan motor connector (B).
12. Install the heat shield cover. (Models without ATF warmer)
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
13. Install the under cover.
14. Lower the vehicle.
15. Connect the ground cable to the battery.
16. Fill engine coolant.
17. Check the ATF level.