COOLING(H4SO) > General Description
|
Cooling system |
Electric fan + Forced engine coolant circulation system | ||||
|
Total engine coolant capacity |
MT |
SOHC model |
L (US qt, Imp qt) |
Approx. 6.8 (7.2, 6.0) | |
|
DOHC Non-turbo model |
Approx. 6.9 (7.3, 6.1) | ||||
|
AT |
SOHC model |
Approx. 6.7 (7.1, 5.9) | |||
|
DOHC Non-turbo model |
Approx. 7.3 (7.7, 6.4) | ||||
|
Water pump |
Type |
Centrifugal impeller type | |||
|
Discharge performance I |
Discharge rate |
L (US gal, Imp gal) /min |
20 (5.3, 4.4) | ||
|
Pump speed — Discharge pressure |
760 rpm — 2.9 kPa (0.3 mAq) | ||||
|
Engine coolant temperature |
80°C (176°F) | ||||
|
Discharge performance II |
Discharge rate |
L (US gal, Imp gal) /min |
100 (26.4, 22.0) | ||
|
Pump speed — Discharge pressure |
3,000 rpm — 49 kPa (5.0 mAq) | ||||
|
Engine coolant temperature |
80°C (176°F) | ||||
|
Discharge performance III |
Discharge rate |
L (US gal, Imp gal) /min |
200 (52.8, 44.0) | ||
|
Pump speed — Discharge pressure |
6,000 rpm — 225.4 kPa (23 mAq) | ||||
|
Engine coolant temperature |
80°C (176°F) | ||||
|
Impeller diameter |
mm (in) |
76 (2.99) | |||
|
Number of impeller vanes |
8 | ||||
|
Pump pulley diameter |
mm (in) |
60 (2.36) | |||
|
Clearance between impeller and case |
Standard |
mm (in) |
0.5 — 1.5 (0.020 — 0.060) | ||
|
Thermostat |
Type |
Wax pellet type | |||
|
Opening start temperature |
SOHC model |
Engine side |
80 — 84°C (176 — 183°F) | ||
|
DOHC Non-turbo model |
Engine side |
89 — 92°C (192 — 198°F) | |||
|
ATF warmer side |
69 — 73°C (156 — 163°F) | ||||
|
Fully opens |
SOHC model |
Engine side |
95°C (203°F) | ||
|
DOHC Non-turbo model |
Engine side |
98°C (208°F) | |||
|
ATF warmer side |
84°C (183°F) | ||||
|
Valve lift |
Engine side |
mm (in) |
9.0 (0.354) or more | ||
|
ATF warmer side |
mm (in) |
8.0 (0.315) or more | |||
|
Valve bore |
mm (in) |
35 (1.38) | |||
|
Radiator fan |
Motor input |
Main fan |
90 W | ||
|
Sub fan |
90 W | ||||
|
Fan diameter / Blade |
Main fan |
300 mm (11.81 in)/4 | |||
|
Sub fan |
300 mm (11.81 in)/5 | ||||
|
Radiator |
Type |
Down flow, pressure type | |||
|
Core dimensions |
Width × Height × Thickness |
mm (in) |
687.4 × 340 × 16 (27.06 × 13.39 × 0.63) | ||
|
Pressure range in which cap valve is open |
kPa (kg/cm2, psi) |
Above: 108±15 or more (1.1±0.15, 16±2) Below: −1.0 to −4.9 or less (−0.01 — −0.05, −0.1 — −0.7) | |||
|
Fins |
Corrugated fin type | ||||
|
Reservoir tank |
Capacity |
L (US qt, Imp qt) |
0.45 (0.48, 0.40) | ||
|
Recommended materials |
Item number |
Alternative | |
|
Coolant |
SUBARU SUPER COOLANT (Concentrated type) |
— |
Non-amine type |
|
SUBARU SUPER COOLANT (Diluted type) |
K0670Y0001 | ||
|
Water for dilution |
Distilled water |
— |
Soft water or tap water |