1. Disconnect the engine ground terminal from intake manifold.
2. Remove the ignition coil and ignitor assembly. 
3. Remove the throttle body.
4. Remove the EGR valve.
5. Remove the plug cord stay.
6. Remove the fuel pipe protector LH.
7. Remove the fuel pipe protector RH.
8. Disconnect the connectors (A) from fuel injector.
9. Remove the harness band (B) which holds the engine harness to injector pipe.
10. Remove the purge control solenoid valve.
11. Remove the bolts which hold engine harness to intake manifold.
12. Remove the engine harness from intake manifold.
13. Remove the bolts which install fuel injector pipe on the intake manifold as shown in the figure
• RH side
• LH side
14. Remove the fuel injectors from the fuel injector pipe.
15. Disconnect the quick connector that fastens the fuel injector pipe RH to the fuel pipe.
16. Disconnect the quick connector that fastens the fuel injector pipe LH to the fuel pipe.
17. Remove the fuel injector pipe RH and LH.
18. Remove the bolts which install fuel pipes on intake manifold.
19. Remove the fuel pipe from intake manifold.