NOTE:
When assembling the nipple, apply liquid gasket.
Liquid gasket:
THREE BOND 1105 (Part No. 004403010) or equivalent
1. Tighten the bolts which install fuel pipes on intake manifold.
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
2. Connect the fuel injector pipe LH to the fuel pipe.
NOTE:
Connect the quick connector securely.
3. Connect the fuel injector pipe RH to the fuel pipe.
NOTE:
Connect the quick connector securely.
4. Install the fuel injector.
5. Tighten the bolts which install fuel injector pipes on intake manifold.
• RH side
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
• LH side
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
6. Install the engine harness to the intake manifold.
7. Tighten the bolts which install engine harness on intake manifold.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
8. Install the purge control solenoid valve. 
9. Connect the connectors (A) to fuel injector.
10. Hold the engine harness to injector pipe by harness band (B).
11. Install the fuel pipe protector RH.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
12. Install the fuel pipe protector LH.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
13. Install the plug cord stay.
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
14. Install the EGR valve.
15. Install the throttle body to intake manifold.
16. Install the ignition coil and ignitor assembly.
17. Install the engine ground terminal to intake manifold.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
