WARNING:
Place “NO OPEN FLAMES” signs near the working area.
CAUTION:
• Be careful not to spill fuel.
• When the fuel meter indication is higher than two third of the total, perform the work after draining the fuel not to spill the fuel.
1. Release the fuel pressure. 
2. Drain fuel.
3. Disconnect the ground cable from battery.
4. Remove the rear seat cushion.
5. Remove the service hole cover.
6. Disconnect the connector from the fuel sub level sensor.
7. Disconnect the quick connector, then disconnect the fuel delivery tube and jet pump tube.
8. Remove the nuts and bolts which install fuel sub level sensor on fuel tank.
|
(A) |
Jet pump tube |
|
(B) |
Fuel delivery tube |
9. Remove the fuel sub level sensor.