1. Disconnect the ground cable from battery.

2. Remove the air intake chamber.

3. Remove the bolt and disconnect the engine harness connector from the bulkhead harness connector and rear engine hanger.

4. Slide the bulkhead harness connector in the direction of the arrow and remove the rear engine hanger.

5. Disconnect the connector from the oil switching solenoid valve.

6. Remove the oil switching solenoid valve.

7. Remove the variable valve lift diagnosis oil pressure switch.

8. Remove the oil temperature sensor.

9. Remove the oil switching solenoid valve holder from the cylinder head.

1. Disconnect the ground cable from battery.

2. Remove the V-belts.

3. Remove the crank pulley.

4. Remove the timing belt cover.

5. Remove the timing belt.

6. Remove the cam sprocket.

7. Remove the timing belt cover No. 2 (LH).

8. Disconnect the connector from the oil switching solenoid valve.

9. Remove the oil switching solenoid valve.

10. Remove the variable valve lift diagnosis oil pressure switch.

11. Remove the oil switching solenoid valve holder from the cylinder head.