Install in the reverse order of removal.
NOTE:
• Connect the evaporation hose as shown in the figure.
|
(A) |
To fuel pipe (intake manifold) |
|
(B) |
To fuel pipe (evaporation line) |
• Refer to the following figure for the mounting hole of the purge control solenoid valve because the location differs according to intake manifold specification.
|
(A) |
Without model number |
|
(B) |
With model number |
• See the following figure to check if the intake manifold has a model number.
|
(A) |
Model number (single digit number) |
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
