KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Collation ECM Output Check

OPERATION

1. On «Main Menu» display, select {Each System Check}.

2. On «System Selection Menu» display, select {Keyless access system}.

3. On «Keyless access system» display, select {Collation ECM}.

4. Click the [OK] button after the control module name (Collation ECM) is displayed.

5. On «Collation ECM» display, select {Collation ECM output check}.

6. On «Collation ECM output check» display, select {Drive item}.

7. Select the desired function on the «Drive item», and click the [Next] button.

8. Select [Exit] to exit the drive item mode. The screen will return to the «Drive item» screen.

Data

Collation ECM output check

Remarks

Tuner power supply ON (indoor tuner)

Output

Perform check of the power supply for the receiver.

Stop

Driver’s external transmitter

Output

Perform the output check for the driver’s side door outside antenna.

Stop

Passenger’s external transmitter

Output

Perform the output check for the passenger’s side door outside antenna.

Stop

Front interior transmitter

Output

Perform the output check for the passenger room front antenna.

Stop

Rear interior transmitter

Output

Perform the output check for the passenger room center antenna.

Stop

Transmitter in the trunk/rear gate

Output

Perform the output check for the passenger room rear antenna.

Stop

Transmitter outside the trunk/rear gate

Output

Perform the output check for the rear outside antenna.

Stop

External buzzer

Output

Perform the output check for the access buzzer.

Stop

NOTE:

• Each output check continues to run for about five seconds before stopping automatically.

• The voltage will stabilize at about 3 mV when the voltage is measured during output using tester.