1.CHECK BODY INTEGRATED UNIT FUNCTION.
Insert the key into the ignition switch (LOCK position), then measure changes in voltage between the antenna connectors.
Connector & terminal
(B415) No. 1 (+) — No. 2 (−):
|
Is the voltage −30 — 30 V? (Approx. 0.1 second after inserting the key) Is the voltage 0 V? (Approx. 1 second after inserting the key)
|
|
Replace the body integrated unit,  Replace all ignition keys (including the transponder). Execute the registration procedure next. Refer to the “PC application help for Subaru Select Monitor”.
|
2.CHECK IGNITION KEY (TRANSPONDER).
1) Remove the key from ignition switch.
2) Start the engine using other key which is already registered.
|
|
Replace the ignition key (including the transponder). Execute the registration procedure next. Refer to the “PC application help for Subaru Select Monitor”.
|
Replace the body integrated unit, Replace all ignition keys (including the transponder). Execute the registration procedure next. Refer to the “PC application help for Subaru Select Monitor”.
|