VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC C0071 STEERING ANGLE SENSOR OFFSET IS TOO BIG

DTC DETECTING CONDITION:

Defective steering angle sensor

TROUBLE SYMPTOM:

VDC does not operate.

WIRING DIAGRAM:

• LHD model

• RHD model

STEPCHECKYESNO

1.CHECK STEERING WHEEL.

1) Drive the vehicle on a flat road.

2) Park the vehicle straight.

3) Check the steering wheel for deviation from center.

Is the deviation from the center of steering wheel less than 5°?

Perform the centering adjustment of steering wheel.

2.CHECK VDCCM&H/U.

1) Turn the ignition switch to OFF.

2) Connect all connectors.

3) Clear the memory.

4) Perform the Inspection Mode.

5) Read the DTC.

Is the same DTC displayed?

Replace the VDCCM only.

3.CHECK OTHER DTC DETECTION.

Is any other DTC displayed?

Perform the diagnosis according to DTC.

Temporary poor contact occurs.