1. On «Main Menu» display, select {Each System Check}.
2. On «System Selection Menu» display, select {Brake Control System}.
3. Click the [OK] button after the {VDC} is displayed.
4. On «Brake Control Diagnosis» display, select {Diagnostic Code(s) Display}.
5. Record the DTC and data.
NOTE:
• For detailed operation procedures, refer to “PC application help for Subaru Select Monitor”.
• For details concerning DTCs, refer to “List of Diagnostic Trouble Code (DTC)”. 
• Up to 3 DTCs are displayed in the order of detection.
• If a particular DTC is not stored in memory properly at the occurrence of problem (due to a drop in VDCCM&H/U power supply etc.), the DTC suffixed with a question mark “?” is displayed on Subaru Select Monitor display screen. This shows it may be an unreliable reading.
|
Display |
Contents to be monitored |
|
Current |
The current DTC is displayed on Subaru Select Monitor display screen. |
|
Old |
The latest DTC from the history of previous problems is displayed on Subaru Select Monitor display screen. |
|
Older |
The second latest DTC from the history of previous problems is displayed on the Subaru Select Monitor display screen. |
|
Before 3 |
The third latest DTC from the history of previous problems is displayed on Subaru Select Monitor display screen. |