NOTE:
• The cancel code is registered even when cancel is performed intentionally by the driver.
• Cancel codes are cleared if the ignition switch is turned to OFF.
• If a different cancel code is input after a cancel code (latest code) has been input, the latest code is overwritten.
• If the cruise indicator light is flashing, a malfunction is occurring in the system or cruise control related switch. The cancel code at this time is saved even after ignition switch is OFF as a memory code of a past malfunction.
• To display a cancel code, use the Subaru Select Monitor to read the code after the cruise control is deactivated during a driving test.
|
Cancel code |
Item |
Contents of diagnosis |
Reference |
|
11 |
Main Switch |
Main switch of cruise control command switch is turned to OFF, and then the cruise control is released. |
This code is displayed without operating the main switch. |
|
12 |
Stop Light & Brake Switch |
Stop light switch or brake switch is turned to ON, and then the cruise control is released. |
This code is displayed without depressing the brake pedal. |
|
13 |
Clutch Switch |
Clutch switch is turned to ON, and then the cruise control is released. |
This code is displayed without depressing the clutch pedal. |
|
14 |
Neutral Position Switch |
Neutral position switch is turned to ON, and then the cruise control is released. |
This code is displayed without shifting to neutral position. |
|
15 |
Cancel Switch |
Cancel switch is turned to ON, and then the cruise control is released. |
This code is displayed without operating the cancel switch. |
|
16 |
Ignition switch |
Ignition switch is turned to OFF, and then the cruise control is released. |
This code is displayed without operating the ignition switch. |
|
21 |
Cruise control switch malfunction when ignition switch is turned to ON |
When the ignition switch is turned to ON, each switch of cruise control command switch is already turned to ON. |
This code is displayed when the ignition switch is turned to ON without operating the cruise control command switch. |
|
22 |
Abnormality of change in vehicle speed |
Malfunction of vehicle speed signal variation is detected. |
|
|
24 |
Abnormality of switches related to cruise control |
Open circuit of the cruise control switch is detected during cruise driving. (The system is judged as model without cruise control.) |
This code is displayed with normal operation. |
|
31 |
Abnormal engine speed Signal |
• Abnormal increase of engine speed is detected. • Gear is placed in Neutral, 1st or Reverse position. |
Cruise in 2nd shift position or more. |
|
32 |
Cruse Control out of Range |
• Controlled vehicle speed decreased under the limit during cruising. • Set operation was performed at vehicle speed unavailable for setting. • RESUME operation was performed without memorized vehicle speed. |
This code is displayed, though the vehicle speed is increased to the speed available for cruise set and set operation was performed again. |
|
34 |
Prohibition of cruise control at continuing big Accel. angle |
The vehicle has been driven at higher speed than set vehicle speed for an abnormally long time (approximately 10 minutes) during cruise driving. |
This code is displayed when driving for a long period of time at higher speed than appropriate cruise set vehicle speed by operating accelerator pedal. In this case, the cruise setting is deactivated. |
|
35 |
Prohibition of cruise control at vehicle speed F/B malfunction |
Set vehicle speed cannot be kept because of some reasons (steep uphill, parking brake, abnormal decrease of engine output, etc.) during cruise driving. |
This code is displayed when driving condition is not suitable for cruise control. Perform cruise set operation again after clearing the possible cause. |
|
41 |
VDC/TCS Operating |
Vehicle dynamics control (VDC) or TCS is operated during cruise driving or cruise setting. |
This code is displayed when driving condition is not suitable for cruise control. Perform cruise set operation again after clearing the possible cause. |
|
43 |
ABS/VDC Failure |
ABS or Vehicle dynamics control (VDC) system malfunction is detected during cruise driving or cruise setting. |
|
|
44 |
Body Integrated unit Failure |
Body integrated unit system malfunction is detected during cruise driving or cruise setting. |
|
|
45 |
Meter Failure |
Combination meter malfunction is detected during cruise driving or cruise setting. |
|
|
61 |
Brake switch abnormal |
Malfunction in the stop light & brake switch is detected. |
|
|
62 |
Neutral Switch Failure |
Neutral position switch malfunction is detected. |
|
|
63 |
Abnormality of change in vehicle speed |
Malfunction of vehicle speed signal variation is detected. |
|
|
64 |
Engine Sensor Failure 1 |
Malfunction related to engine is detected. |
|
|
65 |
Abnormality 1 of switches related to cruise control 1 |
Cruise control command switch malfunction is detected. (When the switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected.) |
|
|
66 |
Cruise Control Calculation Error |
Cruise control calculation (microcomputer) malfunction is detected. |
|
