AIRBAG SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)

OPERATION

When malfunction of airbag system occurs, the DTC stored in airbag control module will be read out.

1. Using the Subaru Select Monitor, select {Each System Check} in the «Main Menu».

2. On the «System Selection Menu», select {Airbag System}.

3. After {Airbag System} is displayed, select [OK].

4. Select the {Diagnostic Code(s) Display} in «Airbag System».

5. Record the DTC displayed.

NOTE:

• For details concerning the operation procedure, refer to the “PC application help for Subaru Select Monitor”.

• For details concerning DTCs, refer to List of Diagnostic Trouble Code (DTC).

• If “No diagnostic Code Present” is displayed, the combination meter fault or the open circuit of harness is possible. For the diagnostic procedure:

• When the airbag warning light is OFF and “No diagnostic Code Present” is displayed on Subaru Select Monitor, the airbag system is operating properly.