| CHECK HEADLIGHT ASSEMBLY (LEVELING ACTUATOR) DRIVE. |
|
1) Make the vehicle at stationary condition. 2) Turn the ignition switch to ON, and within 10 seconds, repeat OFF ⇒ ON of headlight switch 5 times. 3) Make sure that the headlight aiming is lowered, and then returns to the original position. 4) Hold the ignition ON condition for 30 seconds or more, and then Turn the ignition switch to OFF. |
| QUESTION | |
|
Does the headlight aiming lower once, and then return to the original position? | |
| Yes | No |
|
Replace the headlight beam leveling ECM. |
|
