CHECK HARNESS BETWEEN HEADLIGHT BEAM LEVELING ECM AND INDICATOR BULB.

1) Turn the ignition switch to OFF.

2) Disconnect the connector of ECM.

3) Disconnect the combination meter connector.

4) Measure the continuity between headlight beam leveling ECM and combination meter.

Connector & terminal

(B383) No. 6 — (i10) No. 13:

QUESTION
Is there continuity?
Yes	No
Replace the headlight beam leveling ECM.	Repair the open circuit or poor contact of the connector in harness between headlight beam leveling ECM and indicator.