| CHECK HARNESS CONNECTOR BETWEEN AT SHIFT LOCK CONTROL UNIT AND CHASSIS GROUND. |
|
1) Turn the ignition switch to OFF. 2) Measure the resistance of the harness between the AT shift lock control unit and chassis ground. Connector & terminal LHD model (B373) No. 10 — Chassis ground: RHD model (B376) No. 10 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair open circuit of harness between the AT shift lock control unit and chassis ground. |
