| CHECK HARNESS BETWEEN ECM AND COMBINATION METER CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the combination meter. 3) Measure the resistance between ECM and combination meter. Connector & terminal (B136) No. 10 — (i10) No. 12: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
Repair the poor contact of ECM connector. |
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between ECM and combination meter connector • Poor contact in ECM connector • Poor contact in combination meter connector • Poor contact of coupling connector |