| CHECK HARNESS BETWEEN ECM AND EGR SOLENOID VALVE CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the EGR valve. 3) Turn the ignition switch to ON. 4) Measure the voltage between ECM connector and chassis ground. Connector & terminal DTC P1493; (B134) No. 12 (+) — Chassis ground (−): DTC P1495; (B134) No. 14 (+) — Chassis ground (−): DTC P1497; (B134) No. 13 (+) — Chassis ground (−): DTC P1499; (B134) No. 15 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
Repair the power supply short circuit of harness between ECM and EGR solenoid valve connector. After repair, replace the ECM. |
Replace the ECM. |
