| CHECK GROUND CIRCUIT FOR ECM. |
|
1) Turn the ignition switch to OFF. 2) Measure the resistance between ECM connector and chassis ground. Connector & terminal (B134) No. 6 — Chassis ground: (B135) No. 3 — Chassis ground: (B135) No. 4 — Chassis ground: (B137) No. 1 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 5 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between ECM connector and engine ground terminal • Poor contact in ECM connector • Poor contact of coupling connector |
