| CHECK HARNESS BETWEEN CAMSHAFT POSITION SENSOR AND ECM. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from ECM. 3) Measure the resistance between camshaft position sensor and ECM. Connector & terminal (E36) No. 2 — (B137) No. 12: (E36) No. 3 — (B137) No. 31: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit between camshaft position sensor and ECM. |
