| CHECK HARNESS BETWEEN ECM AND TUMBLE GENERATOR VALVE POSITION SENSOR CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Measure the resistance of harness between ECM connector and tumble generator valve position sensor connector. Connector & terminal (B134) No. 16 — (E50) No. 3: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between tumble generator valve position sensor and ECM connector • Poor contact in ECM connector • Poor contact of tumble generator valve position sensor connector • Poor contact of coupling connector |
