| CHECK HARNESS BETWEEN ECM AND ELECTRONIC THROTTLE. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM. 3) Measure the resistance between connector terminals. Connector & terminal (B134) No. 28 — (B134) No. 19: |
| QUESTION | |
|
Is the resistance 1 MΩ or more? | |
| Yes | No |
|
Repair the poor contact of harness. Replace the electronic throttle if defective. |
Repair the short to power supply in harness between ECM and electronic throttle connector. |
