| CHECK HARNESS CONNECTOR BETWEEN TCM AND HOLD SWITCH. |
|
1) Disconnect the connectors from TCM and combination meter. 2) Measure the resistance of harness connector between TCM and hold switch. Connector & terminal LHD model (B55) No. 9 — (R92) No. 3: RHD model (B55) No. 9 — (B133) No. 3: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit of harness between TCM and hold switch connector, and poor contact of connector. |
