CHECK INDICATION OF DTC ON DISPLAY.

1) Turn the ignition switch to OFF.

2) Connect the Subaru Select Monitor or general scan tool to data link connector.

3) Turn the ignition switch to ON, and the Subaru Select Monitor or general scan tool power switch to ON.

4) Read DTC on Subaru Select Monitor or general scan tool.

QUESTION

Is DTC displayed on the Subaru Select Monitor or general scan tool?

Yes No

Record the DTC. Repair the trouble cause.

Repair the related parts.

NOTE:

If DTC is not shown on display although the malfunction indicator light illuminates, perform the diagnosis of malfunction indicator light circuit or combination meter.