| CHECK INPUT VOLTAGE OF G SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Remove the console box. 3) Remove the G sensor from vehicle. (Do not disconnect the connector.) 4) Turn the ignition switch to ON. 5) Measure the voltage between G sensor connector terminals. Connector & terminal (B292) No. 1 (+) — No. 3 (−): |
| QUESTION | |
|
Is the voltage 4.75 — 5.25 V? | |
| Yes | No |
|
|
Repair the harness connector between the G sensor and ABSCM&H/U. |
