| CHECK INPUT VOLTAGE OF PRESSURE SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from VDCCM. 3) Remove the cover from VDCCM. 4) Connect the connector to the VDCCM. 5) Connect all connectors. 6) Turn the ignition switch to ON. 7) Do not depress the brake pedal. 8) Measure the voltage between VDCCM connector terminals. Connector & terminal (B310) No. 44 (+) — No. 75 (−): |
| QUESTION | |
|
Is the voltage 0.48 — 0.72 V? | |
| Yes | No |
|
|
Replace the VDCH/U. |