CHECK YAW RATE & LATERAL G SENSOR.

1) Turn the ignition switch to OFF.

2) Remove the yaw rate & lateral G sensors from vehicle.

3) Connect the connector to the yaw rate & lateral G sensor.

4) Connect the connector to the VDCCM.

5) Turn the ignition switch to ON.

6) Measure the voltage between yaw rate & lateral G sensor connector terminals.

Connector & terminal

(B257) No. 5 (+) — No. 6 (−):

QUESTION

Is the voltage 2.3 — 2.7 V when yaw rate & lateral G sensor is on a level?

Yes No

Replace the yaw rate & lateral G sensor.