| CHECK YAW RATE & LATERAL G SENSOR INPUT VOLTAGE. |
|
1) Turn the ignition switch to OFF. 2) Remove the console box. 3) Disconnect the connector from yaw rate & lateral G sensor. 4) Turn the ignition switch to ON. 5) Measure the voltage between yaw rate & lateral G sensor connector terminals. Connector & terminal (B257) No. 3 (+) — No. 6 (−): |
| QUESTION | |
|
Is the voltage 10 — 15 V? | |
| Yes | No |
|
|
Repair the harness or connector between yaw rate & lateral G sensor and VDCCM. |
