CHECK WIRING HARNESS.

1) Turn the ignition switch to OFF.

2) Install the ABS warning light bulb to the combination meter.

3) Install the combination meter.

4) Fit one sheet of paper (thickness 1.5 mm (0.059 in)) into the switch of the VDCCM connector.

5) Turn the ignition switch to ON.

6) Measure the voltage between VDCCM connector and chassis ground.

Connector & terminal

ABS warning light

(B310) No. 53 (+) — Chassis ground (−):

VDC warning light

LHD
(B310) No. 61 (+) — Chassis ground (−):
RHD
(B310) No. 61 (+) — Chassis ground (−):
(B310) No. 73 (+) — Chassis ground (−):

Brake warning light

(B310) No. 54 (+) — Chassis ground (−):

VDC indicator light

(B310) No. 72 (+) — Chassis ground (−):

QUESTION

Is the voltage 10 — 15 V?

Yes No

Repair the wiring harness.