| CHECK POWER SUPPLY CIRCUIT. |
|
1) Turn the ignition switch to ON. 2) Measure the voltage between connector (2R) in the test harness R and chassis ground. Connector & terminal (2R) No. 1 (+) — Chassis ground (−): (2R) No. 6 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
Repair the harness between the airbag control module and the battery. Or replace the airbag main harness along with the bulkhead harness. |
