| CHECK AUTO A/C CONTROL MODULE SIGNAL VOLTAGE. |
|
1) Turn the ignition switch to ON. 2) Turn the air flow control dial and measure the voltage between auto A/C control module harness connector and chassis ground for each mode. Connector & terminal (i48) No. 5 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage approx. 5 V at the BI-LEVEL and DEF positions, and approx. 0 V at the VENT, HEAT and D/H positions? | |
| Yes | No |
|
|
|
