CHECK POWER SUPPLY TO MAGNET CLUTCH OF A/C COMPRESSOR.

1) Turn the ignition switch to OFF, and connect the A/C relay and all disconnected connectors.

2) Start the engine and turn the A/C switch to ON.

3) Turn the temperature control dial at maximum cool position.

4) Measure the voltage between magnet clutch harness connector and chassis ground.

Connector & terminal

(F24) No. 1 (+) — Chassis ground (−):

QUESTION
Is the voltage 10.5 V or more (at normal temperature)?
Yes	No
	Repair the harness of the A/C compressor power supply circuit.