1. Move the hill holder up an inclination of 3° or more to confirm the stopping and starting functions.
(1) When the vehicle does not stop:
Tighten the PHV cable adjustment nuts.
(2) When the vehicle does not start:
A: After the clutch is engaged, when the hill holder is released (and there seems like the engine has stalled): Gradually loosen the adjusting nuts until the start is smooth.
B: Before the clutch is engaged and the hill holder is released (the vehicle slightly slips): Tighten the adjusting nuts (State of A) so that the hill holder is released after the clutch is engaged. Then, adjust in the same way as A.
CAUTION:
• When turning the adjusting nuts, use a pliers to hold the inner cable to prevent over-turning.
• Replace the pressure hold valve (PHV) or PHV cable with new parts if there is a problem or damage.
|
(A) |
Lock nut |
|
(B) |
Adjusting nut |
|
(C) |
Pressure hold valve |