|
(A) |
Black clip |
|
(B) |
Black clip |
|
(C) |
Bolt |
1. Replace the black clips (1) and (2) with new parts. Install the clip with arrow mark facing the front side of grille (A).
2. Replace the black clips (3) with a new part.
3. Insert the front hood grille clip and engage the three clips.
NOTE:
Make sure that the anchor portion of each clip is firmly engaged.
4. Install the five nuts.
Tightening torque:
4.4 N·m (0.45 kgf-m, 3.25 ft-lb)
5. Hook the two hooks (A) of grille duct to the hood holes.
6. Install the grille duct with the five screws and clip (A).
CAUTION:
When the grommet installed to the hood inner is broken, replace the grommet with new part.
Tightening torque:
1.0 N·m (0.1 kgf-m, 0.74 ft-lb)
