SECURITY AND LOCKS > Keyless Transmitter

REPLACEMENT

1. KEYLESS TRANSMITTER REGISTRATION

NOTE:

• A maximum of three keyless transmitters can be registered for each individual vehicle.

• When replacing the keyless transmitter (key), registration for the immobilizer system is also necessary.

1. Remove the driver’s side side sill cover, and then connect the registration connector at the lower portion of front pillar.

2. Release the door lock.

3. To register, with the driver’s side door lock switch pressed to the UNLOCK side, press any button of the keyless transmitter twice.

4. Door lock automatically operates LOCK and UNLOCK in order. This indicates that registration of the first keyless transmitter is completed.

5. Repeat step 3) and 4) to register the second and third keyless transmitter.

6. After all registration is completed, disconnect the registration connector. Check the door lock operation with the newly registered keyless transmitter, and then install the driver’s side side sill cover.