NOTE:
• Datum points are specified for body repair.
• Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment accuracy.
• Both right and left reference points are symmetrical.
|
(1) |
Radiator panel gauge hole 6 mm (0.24 in) dia. (Vehicle center) |
(13) |
Front glass attaching hole LH 6.5 × 10.5 mm (0.26 × 0.41 in) RH 6.5 × 7 mm (0.26 × 0.28 in) |
(30) |
Pad attaching hole 5 mm (0.20 in) dia. (Symmetrical) |
|
(2) |
Radiator attaching hole 12 mm (0.47 in) dia. (Symmetrical) |
(14) |
Fender attaching hole 10 mm (0.39 in) dia. (Symmetrical) |
(31) |
Harness attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
|
(3) |
Headlight attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(15) |
Fender attaching hole 10 mm (0.39 in) dia. (Symmetrical) |
(32) |
Trim attaching hole 8.5 mm (0.33 in) dia. (Symmetrical) |
|
(4) |
Frame plate gauge hole 8 mm (0.31 in) dia. (Symmetrical) |
(16) |
Front door hinge attaching hole 12 mm (0.47 in) dia. (Symmetrical) |
(33) |
Trim attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
|
(5) |
Bumper beam attaching hole 11 mm (0.43 in) dia. (Symmetrical) |
(17) |
Front door hinge attaching hole 12 mm (0.47 in) dia. (Symmetrical) |
(34) |
Harness attaching hole 7 × 7 mm (0.28 × 0.28 in) (Symmetrical) |
|
(6) |
Fender attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(20) |
Front door switch attaching hole 4.1 mm (0.16 in) dia. (Symmetrical) |
(35) |
Tonneau cover attaching hole 5.5 mm (0.22 in) dia. (Symmetrical) |
|
(7) |
Fender attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(21) |
Rear door hinge attaching hole 12 mm (0.47 in) dia. (Symmetrical) |
(36) |
Rear strut attaching hole 10 mm (0.39 in) dia. (Symmetrical) |
|
(8) |
RH power steering tank attaching hole LH ATF cooler pipe attaching hole 9 mm (0.35 in) dia. |
(22) |
Rear door hinge attaching hole 12 mm (0.47 in) dia. (Symmetrical) |
(37) |
Floor mat attaching hole 8 mm (0.31 in) dia. (Symmetrical) |
|
(9) |
Fender attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(23) |
Front weather strip attaching hole 5.2 mm (0.20 in) dia. (Symmetrical) |
(38) |
Trim attaching hole 9 × 9 mm (0.35 × 0.35 in) (Symmetrical) |
|
(10) |
Fender attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(25) |
Rear weather strip attaching hole 5.2 mm (0.20 in) dia. (Symmetrical) |
(39) |
Trim attaching hole 8 mm (0.31 in) dia. (Symmetrical) |
|
(11) |
Modular bracket gauge hole 8 mm (0.31 in) dia. (Vehicle center) |
(26) |
Rear door switch attaching hole 4.1 mm (0.16 in) dia. (Symmetrical) |
(40) |
Trim attaching hole 8 mm (0.31 in) dia. (Symmetrical) |
|
(12) |
Front strut attaching hole 9.5 mm (0.37 in) dia. (Symmetrical) |
(29) |
Trim attaching hole 8.5 mm (0.33 in) dia. (Symmetrical) |
|
(18) |
Front weather strip attaching hole 5.2 mm (0.20 in) dia. (Symmetrical) |
(29) |
Trim attaching hole 8.5 mm (0.33 in) dia. (Symmetrical) |
(44) |
Harness attaching hole 7 × 7 mm (0.28 × 0.28 in) dia. (Symmetrical) |
|
(19) |
Trim attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(31) |
Harness attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(45) |
Combination light mounting hole 9.5 mm (0.37 in) dia. (Symmetrical) |
|
(24) |
Trim attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
(41) |
Harness attaching hole 7.5 mm (0.30 in) dia. |
(46) |
Combination light mounting hole 7 mm (0.28 in) dia. (Symmetrical) |
|
(27) |
Front pillar gauge hole 12 mm (0.47 in) dia. (Symmetrical) |
(42) |
Assemblies hole 12 mm (0.47 in) dia. |
(47) |
Combination light mounting hole 8 × 15 mm (0.31 × 0.59 in) (Symmetrical) |
|
(28) |
Insulator attaching hole 8 mm (0.31 in) dia. (Symmetrical) |
(43) |
Striker gauge hole 5 mm (0.20 in) dia. (Symmetrical) |
(48) |
Bumper bracket attaching hole 7 mm (0.28 in) dia. (Symmetrical) |
|
(12) |
Front strut attaching hole 9.5 mm (0.37 in) dia. (Symmetrical) |
(55) |
Transverse link attaching hole 17 mm (0.69 in) dia. (Symmetrical) |
(61) |
Rear differential attaching hole 16 mm (0.63 in) dia. (Symmetrical) |
|
(36) |
Rear strut attaching hole 10 mm (0.39 in) dia. (Symmetrical) |
(56) |
Transverse link attaching hole 16 mm (0.63 in) dia. (Symmetrical) |
(62) |
Rear crossmember gauge hole 16 mm (0.63 in) dia. (Symmetrical) |
|
(51) |
Radiator lower frame gauge hole 12 mm (0.47 in) dia. (Symmetrical) |
(57) |
Subframe attaching hole 16 mm (0.63 in) dia. (Symmetrical) |
(63) |
Rear crossmember attaching hole 12 mm (0.47 in) dia. (Symmetrical) |
|
(52) |
Side frame gauge hole 20 mm (0.79 in) dia. (Symmetrical) |
(58) |
Transmission crossmember attaching hole 14 mm (0.55 in) dia. (Symmetrical) |
(64) |
Rear bumper beam attaching hole RH 15 mm (0.57 in) LH 19 × 15 mm (0.75 × 0.59 in) dia. |
|
(53) |
Subframe attaching hole 16 mm (0.63 in) dia. (Symmetrical) |
(59) |
Rear side frame gauge hole 15 mm (0.59 in) dia. (Symmetrical) |
(65) |
Front crossmember attaching hole 12.4 mm (0.49 in) dia. (Symmetrical) |
|
(54) |
Front crossmember attaching hole 12.4 mm (0.49 in) dia. (Symmetrical) |
(60) |
Rear side frame gauge hole 18 mm (0.71 in) dia. (Symmetrical) |
(66) |
Rear crossmember attaching hole 16 mm (0.63 in) dia. (Symmetrical) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
