NOTE:
When checking the wiper motor, it will be easier to check the motor operation if the wiper arm is installed.
1. When the battery is connected to the terminal of connectors as shown in the figure, confirm that the motor operates at low speed.
2. When the battery is connected to the terminal of connectors as shown in the figure, confirm that the wiper motor operates at high speed.
3. Connect the battery to terminals of the connector, and remove the terminal connection with motor rotating at low speed, and stop the wiper motor in mid-operation.
4. Connect the battery and confirm that the motor stops at the automatic stop position after the motor operates at low speed again.
