1. Disconnect the connector from the wiper control relay.
2. Connect the positive (+) probe from the battery to terminal 8 and the negative (−) probe to terminal 6. Connect the positive (+) probe from the voltage meter to terminal 3 and the negative (−) probe to the ground.
3. Measure the voltage when the wiper relay operates.
|
(A) |
Switch position |
|
(B) |
Voltage |
|
(C) |
ON |
|
(D) |
12 V |
|
(E) |
0 V |
|
(F) |
9±2 sec. |
If operation is not as specified, replace the switch.