AIRBAG SYSTEM > Inspection Locations After a Collision

Replace the following parts when the airbag is deployed.

1. FRONT COLLISION

1. Driver’s airbag module

2. Passenger’s airbag module

3. Driver’s seat belt (Pretensioner)

4. Passenger’s seat belt (Pretensioner)

5. Airbag control module

6. Front sub sensor

7. Roll connector

2. SIDE COLLISION

1. Airbag control module

2. Side airbag module (operating side seat bag)

3. Side airbag sensor (Operating side)

3. INSPECTION OF OTHER PARTS

Check for the following parts, and replace the damaged parts with new parts.

1. Steering wheel and steering shaft

Check the steering shaft for mounting conditions and deflection of front and rear, upward and downward directions, and deflection of front and rear direction with tilt lever released. (After a collision, absorbing part of steering shaft may have been operated.)

2. Check the direct type connector of driver’s airbag module, pretensioner, etc. for damage, and also check each harness for pinch and connector damage. Replace the harness as a unit if damage is found.